Warrior Products Universal Front Stubby Bumper with D-Rings and Brush Guard 45", 76-06, CJ, YJ and TJ Wrangler 

Stubby Bumpers are built from the original Rock Crawler models, but have been shortened to fit within the vehicle’s wheel width. This reduction maximizes tire clearance while minimizing weight. A rounded underside provides greater entry and exit clearance. The bumper is compatible with most universal winch plates and popular sway-bar systems. Options include D-rings and/or a 1 ˝” tubing Brush Guard.
Fits:
97-06 Jeep TJ Wrangler
87-95 Jeep YJ Wrangler
76-86 Jeep CJ

Warrior Products Universal Front Stubby Bumper 45" with Brush Guard, 76-06, CJ, YJ and TJ Wrangler 

Stubby Bumpers are built from the original Rock Crawler models, but have been shortened to fit within the vehicle’s wheel width. This reduction maximizes tire clearance while minimizing weight. A rounded underside provides greater entry and exit clearance. The bumper is compatible with most universal winch plates and popular sway-bar systems. Options include D-rings and/or a 1 ˝” tubing Brush Guard.
Fits:
97-06 Jeep TJ Wrangler
87-95 Jeep YJ Wrangler
76-86 Jeep CJ

Warrior Products Front Rock Crawler Bumper with D-Rings and Winch Mount, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper with Winch Mount, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper with D-Rings, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper with D-Rings, Winch Mount and Brush Guard, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper with Winch Mount and Brush Guard, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper with D-Rings and Brush Guard, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper with Brush Guard, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee

Warrior Products Front Rock Crawler Bumper, 84-01 XJ Cherokee 

This is a direct bolt-on front bumper for all Jeep Cherokee & Comanche between 1984-2001. These are cut and formed from a single piece of 11 gauge HRPO steel, and backed with 3/16" mount plates. They are also compatible with many common tow hook bracket/frame tie-in packages including our own #866 reinforcement plate package.
This bumper requires zero cutting and is a direct bolt-on fit. However, we have had very few reports that on 84-96 models that the bumper has contacted the fender flares, thus not allowing the mounting holes to align. In thousands of these bumpers there has been just a few of these issues. You can solve this issue by oblonging the mounting holes in the bumper, or by trimming your fender flares. This is not an issue on 97-01 models as the flares do not extend down. to the bumper.
There are no included holes for mounting lights. Holes for lights can be drilled wherever you would like to place them.
Available options include winch bumper, d-ring mounts, and a brush guard. Actual D-Ring shackles are not included
Fits:
84-01 XJ Cherokee